![dotRed Audio Designs [HOME]](https://static.wixstatic.com/media/6da057_b3f6f5f7ad88440eb82d4f0bea463315~mv2.jpg/v1/fill/w_641,h_97,al_c,q_80,usm_0.66_1.00_0.01,enc_avif,quality_auto/6da057_b3f6f5f7ad88440eb82d4f0bea463315~mv2.jpg)
ACCESSORIES
(Old specification)
(Replacement specifications)
AC adapter set (J)
AC adapter bundled with the following products
"KTPS50-1533DT-3P-VI" and AC cord "AC-2M3P-J/U"
Conversion adapter "3P2P" It is a set product of.
From November 2021, the specifications will be changed as follows.
AC adapter
Old product: KTPS50-1533DT-3P-VI
Replacement: ATS050T-P150
※It is almost a compatible product.
AC cord
Old product:AC-2M3P-J/U
Replacement: No model number.
The length is 1.8m.
*The plug is a 2-pin specification, and the ground wire is
pulled out.
Conversion adapter
Old product:3P2P
Replacement product: AC cord plug is 2P specification with ground wire drawer.
Therefore, there is no alternative.
Due to various circumstances, we will only sell as a set.
This product is a Japanese domestic specification.
Compatible products:
- WORKFRAME84 series
- WORKFRAME168
- POWERBASE
- POWERKIT
PDA65W (PD compatible power adapter and USB type-C cable set)
This is a set of a PD-compatible power adapter and a USB Type-C cable that is included with the products listed below .
Compatible Products:
WORKFRAME84-C
POWERBASE-PD
Duo-DC
DC power distribution cable
A cable attachment that distributes the DC output of an AC adapter to two systems. If one AC adapter can cover the required power for two POWERBASEs, it will lead to savings on AC power strips.
POWER-KITv2
Power bus board
This is a set product that includes the power bus board "POWER-RAILv2" and the power module "POWERBASE-PD".
For details, please refer to the product pages for "POWER-RAILv2" and "POWERBASE-PD".
MASK84v2
Durable front cover for WORKFRAME84
Front cover for WORKFRAME84.
Even with the patch cable plugged into the module,
so it has a depth of 50mm for mounting.
In addition, it is made of durable metal, so it protects the important modular system from impacts.
The logo plate attached to the left end of WORKFRAME84 can be attached to MASK84.
* Attach the plate with hook to WORKFRAME84 and use it. Therefore, WORKFRAME84 with RACK-EAR can not be used this cover.
*WORKFRAME84-B does not have a logo plate, so it looks different from this image.
d-BOLT x2
Knurled-head screws for WORKFRAME84
A pack of 16pcs M3 screws which called "d-BOLT" that can be turned by fingers without tools. Please read the product name as D-bolt By Two.
Frequent module swapping can be cumbersome for drivers. Once you use this screw, you can't stop using it. The appearance is also dressed up, killing two birds with one stone.
The nylon set washer is hard to fall off and protects the module panel from scratches.
19" Rack mountable bracket for WORKFRAME84
NUTS'n BOLTS
Square nuts and M3 screws for WORKFRAME84
A set of square nuts and M3 screws, the same as those included in WORKFRAME84.
Including 30pcs each.
If you change modules frequently, they will not be fixed properly due to wear and mis-engagement.
Please use it as a replacement in that case, or as an addition when you run out.
POWER RAIL
Power bus board
This is a power supply bus board that comes standard with the WORKFRAME84.
Equipped with 14 Eurorack 16-pin headers, it increases the possibility of connecting modules with the shortest distance regardless of the position of the module in the case.
It is mostly compatible with Doepfer bus boards, except for the central main power connection connector.
For products sold separately, a polyester protective sheet is attached to the back to prevent short circuits in the power supply.
POWERBASE dedicated connection harness included.
POWER-RAILv2
Power bus board
This is a power supply bus board that comes standard with the WORKFRAME84.
Equipped with 14 Eurorack 16-pin headers, it increases the possibility of connecting modules with the shortest distance regardless of the position of the module in the case.
It is mostly compatible with Doepfer bus boards, except for the central main power connection connector.
For products sold separately, a polyester protective sheet is attached to the back to prevent short circuits in the power supply.
POWERBASE dedicated connection harness included.