top of page

WORKFRAME84

Discontinued product

WORKFRAME84 is an 84HP/3U size Eurorack case with a full metal body.

Its sleek and robust body accepts Eurorack format modules.

Our original aluminum rail has 3 holes on top and bottom for adding/replacement of square nuts.

It is very convenient because there is no need to remove the side panel when adding or replacing modules.

In addition, by adopting the original aluminum rails and square nuts, the ambiguous dimensions that are common in Euroracks can be achieved.

Even the modules that are made solve most of the problems that arise during installation.

A 4HP size high-quality power supply module "POWER BASE" that operates with DC +15V input is connected through dedicated wiring.

Provides power to 14 headers(16-pin) on the bus board.

The maximum supply current that has quiet noise performance is 1000mA each for +12V and -12V, and 500mA for +5V.

It has sufficient current capacity for a module attached to an 84HP size case.

In addition, it is suitable for heat generation, which causes unstable operation, failure, and noise generation, so you can use it with confidence.

 

The appearance of WORKFRAME84 is a combination of calm matte black body and elegant red side panels.

It gives a cool and vivid impression.

Also, by attaching the optional rack mount bracket "RACK-EAR", it can be mounted on a 19-inch rack.

Make it possible. Our unique red paint "335 Cherry" will surely stand out in the rack.

Related products

specification

 

WORKFRAME84

・External dimensions (height x width x depth): 132 x 430 x 90mm

     (Optional Accessories RACK-EAR mounted): 132 × 480 × 90 mm

・Weight: about 1.6 kg

     (Optional item RACK-EAR when installed): about 2 kg

・Color: Matte Black (Body) / 335 Cherry (Side)

 

POWERBASE(standard equipment)

 Power input voltage: DC +15V

 Maximum output power: 30W

 Maximum output current: 1000mA (+12V) , 1000mA (-12V) , 500mA (+5V)  

  *This specification guarantees operation and performance.

AC Adaptor (Bundled items)

Primary input voltage: AC100V-240V, 50/60Hz

Secondary output voltage: DC +15V (+/-5%)

Secondary output current: DC 3.34A   *At least 2.5A is required to meet the POWERBASE specification.

DC-plug dimensions: Outer diameter 5.5 mm , Inner diameter 2.1mm

DC-plug polarity: Center plus (+)

 

*When supplying power to the POWERBASE using anything other than the AC adapter supplied by us, make sure that it satisfies the above specifications.

However, any defects or malfunctions caused by using an AC adapter other than the one supplied by us will not be covered by the warranty.

bottom of page